Facial Dysostosis and Related Disorders Panel

  • bpg-method PLUS
  • bpg-method SEQ
  • bpg-method DEL/DUP

Test code: MA0201

The Blueprint Genetics Facial Dysostosis and Related Disorders Panel is a 29 gene test for genetic diagnostics of patients with clinical suspicion of craniofacial dysostosis.

This panel enables differential diagnostics of facial dysostosis and related disorders. This panel is part of Comprehensive Skeletal / Malformation Syndrome Panel.

About Facial Dysostosis and Related Disorders

A dysostosis is a disorder of the development of bone, in particular affecting ossification. Facial dysostosis is a group of congenital craniofacial anomalies caused by abnormal development of the first and second pharyngeal arches during embryogenesis.

Disorders associated with FGFR1, FGFR2, FGFR3, TWIST1 and TCF12 mutations are mostly autosomal recessive, with the exception of GFR3-related CATSHL syndrome and FGFR1-relared Hartsfield syndrome, which have been reported to show autosomal dominant inheritance. Treacher Collins syndrome (TCS), also known as Treacher Collins–Franceschetti syndrome, or mandibulofacial dysostosis, is a rare autosomal dominant congenital disorder characterized by craniofacial deformities, such as absent cheekbones. TCOF1 gene mutations are the most common cause of TCS, accounting for 81 to 93% of all cases. Other associated syndromes include Cornelia de Lange Syndrome, Rubinstein-Taybi syndrome, Floating-Harbor Syndrome and Klippel-Feil syndrome.


Results in 3-4 weeks. We do not offer a maternal cell contamination (MCC) test at the moment. We offer prenatal testing only for cases where the maternal cell contamination studies (MCC) are done by a local genetic laboratory. Read more: http://blueprintgenetics.com/faqs/#prenatal

Genes in the Facial Dysostosis and Related Disorders Panel and their clinical significance
Gene Associated phenotypes Inheritance ClinVar HGMD
ALPL Odontohypophosphatasia, Hypophosphatasia perinatal lethal, infantile, juvenile and adult forms AD/AR 32 270
ALX3 Frontonasal dysplasia type 1 AR 7 7
ALX4 Frontonasal dysplasia type 2, Parietal foramina AD/AR 13 22
CREBBP Rubinstein-Taybi syndrome AD 103 332
DLL3 Spondylocostal dysostosis AR 9 21
EFNB1 Craniofrontonasal dysplasia XL 15 115
EFTUD2 Mandibulofacial dysostosis with microcephaly, Esophageal atresia, syndromic AD 16 88
EP300 Rubinstein-Taybi syndrome AD 21 43
EVC Weyers acrofacial dysostosis, Ellis-van Creveld syndrome AD/AR 7 77
EVC2 Ellis-van Creveld syndrome, Weyers acrodental dysostosis AD/AR 23 66
FGFR1 Pfeiffer syndrome, Trigonocephaly, Hypogonadotropic hypogonadism, Osteoglophonic Dwarfism - Craniostenosis, Hartsfield syndrome AD/Digenic/Multigenic 41 232
FGFR2 Apert syndrome, Pfeiffer syndrome, Jackson-Weiss syndrome, Lacrimoauriculodentodigital syndrome, Beare-Stevenson cutis gyrata syndrome, Antley-Bixler syndrome without genital anomalies or disordered steroidogenesis, Craniofacial-skeletal-dermatological dysplasia, Crouzon syndrome, Bent bone dysplasia AD 47 145
FGFR3 Lacrimoauriculodentodigital syndrome, Muenke syndrome, Crouzon syndrome with acanthosis nigricans, Camptodactyly, tall stature, and hearing loss (CATSHL) syndrome, Achondroplasia, Hypochondroplasia, Thanatophoric dysplasia type 1, Thanatophoric dysplasia type 2, SADDAN AD/AR 47 68
GHR Growth hormone insensitivity syndrome (Laron syndrome) AD/AR 32 100
HDAC8 Cornelia de Lange syndrome XL 18 40
HSPG2 Schwartz-Jampel syndrome, Dyssegmental dysplasia Silverman-Handmaker type, Dyssegmental dysplasia Rolland-Desbuquis type AD/AR 15 52
LIFR Stuve-Wiedemann dysplasia, Schwartz-Jampel type 2 syndrome AR 9 28
NIPBL Cornelia de Lange syndrome AD 246 404
POLR1C Treacher Collins syndrome AR 13 18
RMRP Cartilage-hair hypoplasia, Metaphyseal dysplasia without hypotrichosis, Anauxetic dysplasia AR 24 119
SF3B4 Acrofacial dysostosis 1, Nager AD 25 33
SMC1A Cornelia de Lange syndrome XL 39 54
SMC3 Cornelia de Lange syndrome AD 14 16
SOX9 Campomelic dysplasia, 46,XY sex reversal, Brachydactyly with anonychia (Cooks syndrome) AD 24 135
SRCAP Floating-Harbor syndrome AD 7 24
TCF12 Craniosynostosis AD 13 52
TCOF1 Treacher Collins syndrome AD 17 303
TWIST1 Saethre-Chotzen syndrome, Robinow-Sorauf syndrome, Craniosynostosis AD 14 188
UBE2A Mental retardation, syndromic, Nascimento XL 4 21

*Some regions of the gene are duplicated in the genome leading to limited sensitivity within the regions. Thus, low-quality variants are filtered out from the duplicated regions and only high-quality variants confirmed by other methods are reported out. Read more.

Gene, refers to HGNC approved gene symbol; Inheritance to inheritance patterns such as autosomal dominant (AD), autosomal recessive (AR) and X-linked (XL); ClinVar, refers to a number of variants in the gene classified as pathogenic or likely pathogenic in ClinVar (http://www.ncbi.nlm.nih.gov/clinvar/); HGMD, refers to a number of variants with possible disease association in the gene listed in Human Gene Mutation Database (HGMD, http://www.hgmd.cf.ac.uk/ac/). The list of associated (gene specific) phenotypes are generated from CDG (http://research.nhgri.nih.gov/CGD/) or Orphanet (http://www.orpha.net/) databases.

The strengths of this test include:

  • Blueprint Genetics is one of the few laboratories worldwide with CAP and ISO-15189 accreditation for NGS panels and CLIA certification
  • Superior sequencing quality
  • Careful selection of genes based on current literature, our experience and the most current mutation databases
  • Transparent and easy access to quality and performance data at the patient level that are accessible via our Nucleus portal
  • Transparent and reproducible analytical validation for each panel (see Test performance section; for complete details, see our Analytic Validation)
  • Sequencing and high resolution del/dup analysis available in one test
  • Inclusion of non-coding disease causing variants where clinically indicated (please see individual Panel descriptions)
  • Interpretation of variants following ACMG variant classification guidelines
  • Comprehensive clinical statement co-written by a PhD geneticist and a clinician specialist


This test does not detect the following:

  • Complex inversions
  • Gene conversions
  • Balanced translocations
  • Mitochondrial DNA variants
  • Variants in regulatory or non-coding regions of the gene unless otherwise indicated (please see Non-coding disease causing variants covered by the panel). This mean for instance intronic variants locating deeper than 15 nucleotides from the exon-intron boundary.


This test may not reliably detect the following:

  • Low level mosaicism
  • Stretches of mononucleotide repeats
  • Indels larger than 50bp
  • Single exon deletions or duplications
  • Variants within pseudogene regions/duplicated segments
  • Disorders caused by long repetitive sequences (e.g. trinucleotide repeat expansions)


The sensitivity of this test may be reduced if DNA is extracted by a laboratory other than Blueprint Genetics.

For additional information, please refer to the Test performance section and see our Analytic Validation.

Blueprint Genetics offers a comprehensive Facial Dysostosis and Related Disorders Panel that covers classical genes associated with craniofacial dysostosis. The genes are carefully selected based on the existing scientific evidence, our experience and most current mutation databases. Candidate genes are excluded from this first-line diagnostic test. The test does not recognise balanced translocations or complex inversions, and it may not detect low-level mosaicism. The test should not be used for analysis of sequence repeats or for diagnosis of disorders caused by mutations in the mitochondrial DNA.

Analytical validation is a continuous process at Blueprint Genetics. Our mission is to improve the quality of the sequencing process and each modification is followed by our standardized validation process. Average sensitivity and specificity in Blueprint NGS Panels is 99.3% and 99.9% for detecting SNPs. Sensitivity to for indels vary depending on the size of the alteration: 1-10bps (96.0%), 11-20 bps (88.4%) and 21-30 bps (66.7%). The longest detected indel was 46 bps by sequence analysis. Detection limit for Del/Dup (CNV) analysis varies through the genome depending on exon size, sequencing coverage and sequence content. The sensitivity is 71.5% for single exon deletions and duplications and 99% for three exons’ deletions and duplications. We have validated the assays for different starting materials including EDTA-blood, isolated DNA (no FFPE) and saliva that all provide high-quality results. The diagnostic yield varies substantially depending on the used assay, referring healthcare professional, hospital and country. Blueprint Genetics’ Plus Analysis (Seq+Del/Dup) maximizes the chance to find molecular genetic diagnosis for your patient although Sequence Analysis or Del/Dup Analysis may be cost-effective first line test if your patient’s phenotype is suggestive for a specific mutation profile.

The sequencing data generated in our laboratory is analyzed with our proprietary data analysis and annotation pipeline, integrating state-of-the art algorithms and industry-standard software solutions. Incorporation of rigorous quality control steps throughout the workflow of the pipeline ensures the consistency, validity and accuracy of results. The highest relevance in the reported variants is achieved through elimination of false positive findings based on variability data for thousands of publicly available human reference sequences and validation against our in-house curated mutation database as well as the most current and relevant human mutation databases. Reference databases currently used are the 1000 Genomes Project (http://www.1000genomes.org), the NHLBI GO Exome Sequencing Project (ESP; http://evs.gs.washington.edu/EVS), the Exome Aggregation Consortium (ExAC; http://exac.broadinstitute.org), ClinVar database of genotype-phenotype associations (http://www.ncbi.nlm.nih.gov/clinvar) and the Human Gene Mutation Database (http://www.hgmd.cf.ac.uk). The consequence of variants in coding and splice regions are estimated using the following in silico variant prediction tools: SIFT (http://sift.jcvi.org), Polyphen (http://genetics.bwh.harvard.edu/pph2/), and Mutation Taster (http://www.mutationtaster.org).

Through our online ordering and statement reporting system, Nucleus, the customer can access specific details of the analysis of the patient. This includes coverage and quality specifications and other relevant information on the analysis. This represents our mission to build fully transparent diagnostics where the customer gains easy access to crucial details of the analysis process.

In addition to our cutting-edge patented sequencing technology and proprietary bioinformatics pipeline, we also provide the customers with the best-informed clinical report on the market. Clinical interpretation requires fundamental clinical and genetic understanding. At Blueprint Genetics our geneticists and clinicians, who together evaluate the results from the sequence analysis pipeline in the context of phenotype information provided in the requisition form, prepare the clinical statement. Our goal is to provide clinically meaningful statements that are understandable for all medical professionals, even without training in genetics.

Variants reported in the statement are always classified using the Blueprint Genetics Variant Classification Scheme modified from the ACMG guidelines (Richards et al. 2015), which has been developed by evaluating existing literature, databases and with thousands of clinical cases analyzed in our laboratory. Variant classification forms the corner stone of clinical interpretation and following patient management decisions. Our statement also includes allele frequencies in reference populations and in silico predictions. We also provide PubMed IDs to the articles or submission numbers to public databases that have been used in the interpretation of the detected variants. In our conclusion, we summarize all the existing information and provide our rationale for the classification of the variant.

A final component of the analysis is the Sanger confirmation of the variants classified as likely pathogenic or pathogenic. This does not only bring confidence to the results obtained by our NGS solution but establishes the mutation specific test for family members. Sanger sequencing is also used occasionally with other variants reported in the statement. In the case of variant of uncertain significance (VUS) we do not recommend risk stratification based on the genetic finding. Furthermore, in the case VUS we do not recommend use of genetic information in patient management or genetic counseling. For some cases Blueprint Genetics offers a special free of charge service to investigate the role of identified VUS.

We constantly follow genetic literature adapting new relevant information and findings to our diagnostics. Relevant novel discoveries can be rapidly translated and adopted into our diagnostics without delay. These processes ensure that our diagnostic panels and clinical statements remain the most up-to-date on the market.

Find more info in Support

Choose an analysis method

$ $ 1400
$ $ 1000
$ $ 1600
Total $
Order now

ICD & CPT codes

CPT codes

SEQ 81479
DEL/DUP 81479

ICD codes

Commonly used ICD-10 codes when ordering the Facial Dysostosis and Related Disorders Panel

ICD-10 Disease
Q75.1 Craniofacial dysostosis

Accepted sample types

  • EDTA blood, min. 1 ml
  • Purified DNA, min. 5μg
  • Saliva (Oragene DNA OG-500 kit)

Label the sample tube with your patient’s name, date of birth and the date of sample collection.

Note that we do not accept DNA samples isolated from formalin-fixed paraffin-embedded (FFPE) tissue.

Subscribe to our newsletter